Arctic Accelero Twin Turbo II

Arctic Accelero Twin Turbo II

  • Fan size: 92 mm
  • Compatible graphics cards: Radeon HD2900 series, Radeon HD2600 series, Radeon HD2400 series, Radeon HD3800 series, Radeon HD4800 series, GeForce GTX 2 ** series, Radeon HD3400 series, Radeon HD3600 series, Radeon HD3850 X2, Radeon HD3870 X2, Radeon HD4400 series, Radeon HD4600 series, Radeon HD4870 X2, Radeon HD5800 series, Radeon HD5600 series, Radeon HD5700 series, Radeon HD5900 series, Radeon HD4700 series, GeForce GTS 2 ** series, GeForce GTX 3 ** series, Radeon HD4850 X2, Radeon HD6900 series, Radeon HD7900 series, Radeon HD6700 series, Radeon HD6800 series, Radeon HD7800 series, GeForce GTX 570, GeForce GTX 580, GeForce GTX 590, GeForce GTX 480, GeForce GTX 460, GeForce GTX 465/470, GeForce GTX 670, GeForce GTX 680, GeForce GTX 690, GeForce GTX 550, GeForce GTX 560, GeForce GTS 450, GeForce GTX 770, GeForce GTX 760, GeForce GTX 660 Ti, GeForce GTX 650 Ti, Radeon R7 260X, Radeon R7 260, Radeon R7 270X, Radeon R7 270
  • Heat pipes
Compare prices on all Arctic Graphics Card Coolers
Save this product to a list
Notify me when the price drops
Price alert
Compare to other products
Compare

Arctic Accelero Twin Turbo II

Save this product to a list
Notify me when the price drops
Compare to other products

4.3 of 5 stars

Based on 7 reviews

Sorted by date
09/07/2019
Pleasant to mount but works over the expectation of an EVGA GeForce GTX 1060 Gaming ACX 2.0 HDMI 3xDP 6GB which has a totally useless cooling. I chose to glue the heat sinks with the Arctic Silver Thermal Adhesive and used the Thermal Grizzly Conductonaut on the GPU.

Google

12/03/2014
Others describe it is a right pillig assembly and the included manual is pretty bad. If you take a little time, you become however richly rewarded with a giant efficient and quiet cooler. Sounds as good as nothing, and cool super.

Google

10/02/2013
Edited 09/01/2014
After all, the well is in place it is quite cruel for short. It sounds almost nothing to 100% and 25% is the soundless. At 25% fan speed and all case fans on low so stick temperaturena of 65 degrees despite full load with my 6970th BUT the cooler is very complicated to assemble because the manual is useless and at the sample images, it is an Nvidia graphics card and not a radeon card which makes everything even a little more difficult. It's very difficult to know where to put all the small heatsinks somewhere. But if you manage to fit it all it's all the effort worth it. It is also very affordable.

Google

01/11/2012
I have mounted this fan on my Zotac GTX 560 and can only conclude that this fan åstakommit great deeds! Original fan was a paltry centrifugal fan and temperature at some heavier game quickly went up in 65-70 degrees and the games started lagging. As everyone says, it was the little meckig to mount, you are not used to fiddling with computer hardware so you'll need both time and patience. I sat there so many heatsinks I just got fit and changed the supplied thermal grease towards better from Zalman. Pros: Sounds much smaller than the original fan and managed to simultaneously lower the temperature under full load from ~ 70 ° to ~ 40 °, and idle from ~ 35 ° to ~ 27 °. Then it goes still on the lowest speed (900 rpm), peak power is at 2000 rpm which teaches able to cool the monster cards anywhere. Cons: Took about 1.5 hours to assemble it, but then I took it easy, did not do anything hafsjobb. Conclusion: Awesome, buy!

Google

30/10/2012
As others have written, a little tricky mounting but really good performance and noise level. Very affordable!

Google

Page 1